San Remo Stoves Maxi Instructions d'exploitation

Revised 11-07-11 SAN REMO 8, 12, 20, Maxi FREESTANDING WOOD BURNING BOILER STOVES Installation and Operating Instructions Please hand t

Revised 11-07-11 It is strongly recommended that this stove is fitted to your heating system by a knowledgeable, experienced and suitably qualif

Revised 11-07-11 A heat soak radiator of at least 2kW must be used on the same gravity circuit, positioned above the stove. This is used to diss

Revised 11-07-11 Operating Instructions This appliance is not suitable for use in a shared flue. This appliance should not be operated with t

Revised 11-07-11 Air Controls Primary Air Primary air is controlled via the two rotary air controls on the bottom of the door. This provides a c

Revised 11-07-11 Lighting the Stove We recommend that you have two or three small fires before you operate your stove to its maximum heat outpu

Revised 11-07-11 Safety Notes for your guidance FIRES CAN BE DANGEROUS – Always use a fireguard in the presence of children, the elderly or the i

Revised 11-07-11 Frequently Asked Questions 1 Do stoves require a chimney? All of our multi fuel and wood burning stoves require a suitable chi

Revised 11-07-11 Technical Specifications. Main Dimensions A B C D E F G H J K L M N O San Remo 8 705 510 520 150 260 420

Revised 11-07-11 Assembly Instructions PLEASE READ THESE INSTRUCTIONS CAREFULLY It is strongly recommended that this stove is fitted to your h

Revised 11-07-11 1. Remove stove from pallet and carefully tip it over onto it’s back. 2. Ensure legs and fixings are present as shown. 3

Revised 11-07-11 1. Fit the Flue Collar using the 4-M6 set screws and washers supplied. Screw The M6 nuts on the M6 screws all the way to the end

Revised 11-07-11 List of Components Door Handle 1 Airwash Control Handle 1 Airwash assembly 1 Primary Air Caps 2 Riddlin

Revised 11-07-11 Installation Instructions READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION These instructions cover the basic principl

Revised 11-07-11 Where the chimney is believed to have previously served an open fire installation, it is possible that the higher flue gas temp

Revised 11-07-11 Boiler Connection